Fixing A Hole That Has Appeared On Your Eavestrough

It is easy to not to assume responsibility when a small hole appears in an eaves trough. People tend to leave small issues and only attend to them after they become a big issue. You should never overlook a small hole immediately it appears on your eavestrough because it can lead to more damages. When a leak forms in the eaves trough, it causes fascia boards to rot which if left unattended may lead to a leakage in your house during a downpour. You should do a regular maintenance check on your eavestrough every autumn in preparation for the winter weather.

An eavestrough helps to channel water from the roof to a drainage system during rainy seasons. It also drains excess water during winter as ice thaws. Leaves and debris tend to accumulate in the eavestrough and if not properly cleaned out, this can cause blockages. If water is not drained out properly, it tends to cause damage to the eavestrough and with time, it forms small holes. Maintenance of an eaves trough is usually cheaper compared to repairing it and saves you hundreds of dollars that may come from damage caused by leakages. The following steps will help you to maintain and repair your eaves trough when damaged.

Read more

Secrets About Eavestrough You Should Know About

It may come as a surprise, but the number one reason why eavesthrough cause problems is because of incorrect or faulty installation. It takes a precise skill to mount eavesthrough, a talent not even contractors always have.

Companies specializing in eavestrough in Toronto urge their clients to pay more attention to their rain gutters. If a problem is detected they should call them, as their team of experts has the necessary skills and equipment to inspect, clean, repair or replace broken pieces.

It may be surprising, but firms advertising services for eavestrough in Toronto have many different customers. These companies are frequently called to maintain the eavestrough of the buildings supervised by property management companies, insurance companies, and real estate agents. Quite often, they also receive requests for inspections of residential complexes, as well as private property.

Masters in their trade, eavestroughing specialists can fix problems that laymen cannot. For instance, many people believe that there is no solution to fix leaking corners. That is not so. Just ask any expert repairing eavestrough in Toronto, and you will be told that this problem can easily be repaired. The eavestrougher starts by completing an inspection, because solutions will vary depending on what the problem is. Sometimes a simple realignment of the pieces or adding a downspout is all that is required to get the water flowing again.

Eavestroughs have to be protected and cleaned regularly. If they are not, water can build up. This can be devastating when ice builds up. Once the liquid thaws and flows under your shingles, the damages can be catastrophic. So, why take a chance? Calling an eavestrough specialist occasionally will not only prevent a lot of stress; it will also save you money!

Eavestrough Issues: Repairing Leaks, Holes And Rust

While steel and aluminum eavestroughs have a lifetime of up to 30 years, if neglected, they fast deteriorate. So the number of years your eavestroughs will last depends on how well you care for and maintain them. Eavestroughs maintenance does require climbing up to the roofline of your building using a ladder. For homeowners that aren’t afraid of height, eavestroughs cleaning is not a particularly challenging undertaking.

Thoroughly cleaning out dirt, debris, etc, and making certain rain water flows through your eavestroughs need only be done twice a year. If during your evaluation you encounter maintenance problems such as leaky joints, holes and rust, then here are several tips that might help you resolve them yourself.

Read more

Common Gutter Problems And Their Solutions

The thought of clogged, aging or warped gutters in Toronto often makes homeowners quite frustrated, especially when they are deluged with water whenever they walk underneath the eaves. Generally, there are four common problems with the gutters which you might be well aware of. Here is a brief guide on each of these problems and how you can tackle them.

The four most common problems include:

• Leaky gutter joints

• Bending or warping of old gutters

• Improper pitching

• Gutter clogging due to twigs, leaves and some other debris

If you can climb on your house roof, you may feel that you can fix the gutter problems at your own. The problem may look quite easy at the beginning but do not forget to read some do-it-yourself activity tips before you begin to sort out the problem. If you have never fixed such type of problems before, it is quite better if you seek professional help in this regard. Otherwise, you will be bringing more trouble along your way.

Leaky gutter joints

When it comes to dealing with leaky gutter joints, many people try to fix them on their own. The process is pretty simple. All you need to do is have to a tube of gutter sealant. However, you can only repair the joints when the weather is dry.

Simply apply a small amount of gutter sealant to the inside of the gutter. Let the sealant cure it for almost twenty four hours. In case the hole is big or you feel that the gutter has rusted through, you will have to purchase a patch kit from a nearby hardware store. The patch kits usually come with a screen that can easily fill the hole. Otherwise you may have to create your own patch from a metal flashing remnant.

The entire process will look to be easy for those who are DIY enthusiasts. For others, this may seem to be a highly technical type of work and therefore they will usually hire professional help for this.

Bending or warping of old gutters


This is an inevitable problem that all homeowners experience. Over the period of time the hangers and hardware age and weather. Under such a situation, gutters tend to pull away from the house and sometimes become bogged down due to heavy debris.

In order to get this done yourself, you will have to install new gutter hangers and of course fasteners on warped or sagging sections. Hangers are quite inexpensive therefore will not cost you a fortune. Furthermore, the installation process is quite simple. You would also have to see whether the warped gutter is seated properly or not. In case it is not, you might have to replace some small sections of the gutter itself. It is a quite technical process and usually it is recommended to hire a professional person in this regard. There are some cases when a roofing contractor is also hired if seamless gutters are installed as they cannot be replaced by sections.

Improper pitching of gutters

This problem usually occurs when gutters are pitched improperly or are hastily installed. You can easily check whether your gutters are properly installed or not. Simply go to your roof and see whether they are pitched downward. The gutters need to be pitched at least quarter inch for every ten feet of gutter length. In order to adjust the gutter pitch, you will have to either re-hang the affected sections or bend the hangers a little so that the water flow is accommodated.

In case you have seamless gutters in your home, then they cannot be adjusted easily. You will have to seek professional assistance in this regard and get the matter sorted out. However, you will have to ensure that you are hiring a reputable one for this project. There is no harm in doing a little survey and discussing costs and repair strategies with different experts. After a detail discussion, you will be in a better position to make a right decision.

Gutter clogging due to twigs, leaves and some other debris

Rocks, dirt and plant matter happen to be the main reasons for gutter clogging. They prevent rain water to ruff off flow freely. If you keep on ignoring this problem, the debris will turn into sludge which will later weather the gutters and lead to eventual breakdown. There are times when this issue makes the gutters to weigh down and pull it away from the fascia.

The clogging issue can easily be sorted out if you inspect your gutters thoroughly on regular basis. It does not matter whether you have metal gutters or vinyl gutters. They need your attention. You must remove the clogged areas by simply removing debris with a work glove. To improve the flow, you can clean the gutters with a garden hose. For long term protection, you may have to invest in gutter leaf guards.

Gutter Cleaning Tools That You Should Get To Know

Homeowners know very well how taxing gutter maintenance can be. However, despite their apprehension when it comes to this task, everybody else should know that having clean gutters is always important. After all, nobody wants water to be pooling around their homes and eventually causing damage to the structure’s foundation.

In order to make the task a whole lot easier, you will need a set of gutter cleaning tools. You are given a wide array of choices. Some are traditional, meaning they have been used way before the more modern cleaning tools of today. Others are modernised too with mechanisms that will bring a lot of convenience on the part of any homeowner. Without further ado, here are some gutter cleaning tools to take note of.

Sturdy ladder


This is one of the tools used for traditional gutter cleaning. Without this, you will not be able to do the job. When looking for a ladder, you have to make sure it is high enough to reach the gutters safely and it should allow you to rest your head and chest above the gutters. The principle behind this is to prevent any debris from getting into your eyes and to minimise the possibility of inhaling dust particles.

Wooden paint stir stick

This will be useful in loosening materials at the bottom of the gutter. A stick will also be useful to poke debris that has collected in the downspout. Take note that you should always include the downspout when you clean your gutter that is why this tool is very important. Remember that this is where the water flows. Any dirt that has clogged in this area can affect the purpose of your gutter.

Garden trowel

To make the dirt collection process easier, a garden trowel would be necessary. This traditional gutter cleaning tool will allow you to collect more debris and leaves in a shorter time.

Bucket or trash bin

You would not want to be going back and forth to your garbage can a number of times. With a bucket or trash bin near your work area, you can readily dump dirt without wasting time.

Garden hose

After scraping and troweling out all the dirt, a garden hose can be used to wash your gutter and downspout. This will make the entire spot look better after you have removed the dirt and debris that have accumulated in it. It will also help prepare the gutter for its next use.

Pressure washer

This is one of the latest innovations used for cleaning the gutter. The principle behind using this device is this. Debris and sediment cannot withstand the force of water from this cleaning tool. Grime and film that cannot be removed manually can be easily blasted. Remember, however, using a pressure washer whilst standing on a ladder can be quite dangerous. Obviously, it would be difficult to maintain balance whilst holding something that emits much pressure. To make it as a safe alternative, a wand and gutter cleaning material can be attached. This makes the use of a ladder unnecessary and cleaning can be done in a jiffy.

Telescopic gutter cleaner

With this innovation for gutter cleaning, a ladder can be taken out of the list too. This innovation allows you to clean your gutter with ease. It is manufactured with an aluminum pole, a zinc valve and a brass goose neck that can be easily connected to a component called the garden hose. It promises sweeping action like no other which makes removing debris in your gutters much of a breeze.

Gutter scoops

If there is one thing that makes this innovation different from those of the pressure washer and the telescopic gutter cleaner, that will be the fact that gutter scoops require a ladder. It works well with debris that cannot be easily scooped by hand like pine needles and muddy sediment.

Robot cleaner

For a more high-tech method you can have a ‘robot cleaner’ do the job. The robot is simply attached to your gutter and cleans with a rotating auger and brush combo that spins at 500 rpm. This is an amazing alternative to hands-on cleaning. This also has a disadvantage as it splashes mud to the roof that will be washed back to the gutter again.

Some other important gutter cleaning tools

There are of course other cleaning tools that will help you with gutters and eavestroughs in Toronto. One is the sealant which is noted to be useful in patching up some tiny holes. Of course, you should not forget your working gloves and goggles. Donning on these two materials are for your safety.

Now that you have been familiar with the gutter cleaning tools, you might want to try the job on your own. However, for those who want to avoid the hassles with the task or are not fans of DIY work, you can always ask a contractor to help you with this endeavour.

Keeping The Eavestrough Clean And Maintaining It

Water from the rain may cause extensive damage to your home. It explains a lot why the most vital thing to look for in a new home, after ticking the top five must-haves of a home, is the eavestrough. Essentially, it protects your home from water damage in two ways. It harvests the water and stores it in reservoir tanks or drains it away into the main drainage system. Cleaning and maintaining the eaves trough is well worth your efforts as it helps solving the issue of potential home insurance claim. The entire cleaning process may be a dirty one but the perks are promising. It merely entails the following.

What you need to start cleaning


These are simply the things that you are going to need to clean and maintain the eavestrough. First, you need an extendable ladder. Depending on the size of your home, find a ladder that perfectly suits the activity. Safety needs to be on your mind when selecting the ladder. This means the ladder has to get you safely and easily to the eavestrough without scaring the wits out of you. Ladders with standoff stabilizers are ideally good for the activity.

Next, you need cleaning attire that you do not in the least mind getting dirty. The shirt needs to be long-sleeved. Rubber gloves come in handy for getting rid of leaves that have been in the eavestrough for quite some time. Ensure that the gloves are made of heavy-duty rubber for better results.

Thirdly, you need a bucket with you or a tarp below your work area particularly on the ground. As you go about cleaning, debris usually comes off falling. The bucket or tarp is suitable for catching all the falling debris. If you have a garden, you may make use of the collection of leaves and debris as a mulch to fertilize the soil and make your plants flourish.

A perfect eavestrough scoop will do when doing the cleaning. If you do not have one at your home, just check with your local hardware and get it. Alternatively, a plastic shovel mostly used by kids for playing may fit well for the job. As long as they fit deep into the gutter as you clean, you are better off with either of them.

Cleaning the eavestrough

The cleaning part is simple if you have all the items that you require for cleaning. Ensure that with you is a helper to keep the ladder stable as well as passing the items that you will need in the cleaning process. The best point to start is at one end of the eavestrough. This enables you to scoop off the dirt into the bucket and pass it down to your helper once it is full. Systematic movement around the eavestrough is the only thing that will help you get rid of a large amount of debris within a short time. Work from these focal points ensuring you leave no dirt behind.

Some parts are going to require more attention from you. For instance, the downspout is the part that takes the rainwater all the way down to the ground. As such, examine it keenly and get rid of any debris. If there is a blockage, clear it up. Blockages may cause an overflow even in a clean eavestrough and cause water to pour over the side hence damaging your home. As you clean, ensure you leave no debris and leaves behind in the downspout. Keeping it free from these two will let water flow well without causing any damage to the house.

After you are through with cleaning the eavestrough, let your helper pass a hosepipe and turn the water on. Running the water on the eavestrough removes tiny bits of dirt that may remain even after the previous cleaning. Moreover, it is an effective way of detecting any leak that may be there so you can patch it up.

Doing the repair

Once the cleaning activity is over, you need to shift gears to the worn-out parts that need repair. Over the years, the eavestrough tend to wear and develop leaks. When going about the repair, look out for cracked caulking or holes along the seam. If you find any cracks, you will have to fix them by using a good technological way. Bead silicon sealing is a good method for dealing with leaks present in the eavestrough. After identifying the leaking part, prep it and then apply the bead silicon sealing. For the next one year, you problem will be gone.

Depending on the length of time that your eavestrough stayed without cleaning, the task may have been a dirty one but worth the while. The good thing is that you will not have to worry about home damage again until a year is over save for planning a major repair or replacement of eavestrough. You can do the cleaning on a quarterly basis to ensure your eavestrough is clean throughout the year.

5 Steps to Follow When Doing Eavestrough Repairs

If you are like most people you will often ignore a leaking eavestrough and procrastinate on repairing it. Do not ignore this, because a leaking eavestrough can create a myriad of problems.

Sometimes a leaking eavestrough can indicate a more serious problem either with the installation or the material of the eavestrough. It can even compromise the structure of your roofing system.

Therefore a leaking eavestrough should be treated with seriousness before it becomes a nightmare. Luckily for you there are a lot of professionals who do eavestrough repairs in Toronto at affordable prices.

To get your eavestrough repaired, it is important to follow these steps;

  • Get a professional such as a dealer or a contractor to assess the cause and the extent of the leaking eavestrough. Look for someone who has experience, is available for repairs and assessment and one who offers affordable rates.
  • Following the assessment make a decision on how to fix it.
  • If the leaking is small and easy to fix, consult with the professional on how to fix it and save money.
  • Sometimes a leaking eavestrough may be a symptom of a larger problem. If so it is better to hire a professional. However make sure to ask how long the repairs will take and get a price estimate for the eavestrough repairs.
  • Once the repairs are completed; regularly check the eavestrough for any damage and make a habit of removing any debris from the trough.

Eavestrough Repairs Services in Toronto

Is your eavestrough leaking? Are you looking for an Eavestrough repair in Mississauga, Toronto? Do you want it repaired at a reasonable price? Are you looking for reliable and professional services in Mississauga area?

A leaking eavestrough can create a myriad of problems. This can range from those annoying sounds when drops of water hit a hard surface to damage to the roof and its underlying structure. So do not ignore the signs. It might seem like a small problem now but turn into an expensive nightmare later on.

Fixing them early is an inexpensive process and should be treated with seriousness. Sometimes a leaking eavestrough can indicate a more serious problem either with the installation or the material of the eavestrough.

To get your eavestrough repaired it is important to follow these steps;

  • Get a professional such as a dealer or a contractor to assess the cause and the extent of the leaking eavestrough.
  • Following the assessment make a decision on how to fix it.
  • If the leaking is small and easy to fix, consult with the professional on how to fix it and save some money.
  • If the leaking is a symptom of a larger problem, consult with the professional to know what is wrong, ask the price estimate on the repairs and how long it takes for the job to be completed.
  • Once the repairs have completed regularly check the trough for any damage and make a habit of removing any debris from the trough.