Serving Toronto, Mississauga & the Greater Toronto Area
Serving Toronto, Mississauga & the Greater Toronto Area
Century Aluminum replaces full eavestrough systems for Toronto homeowners whose gutters are too far gone to repair and need a new seamless aluminum installation that will protect their home for decades. Serving Toronto, Mississauga, Oakville & the GTA. Free estimates available.
A full replacement means removing the existing system correctly, inspecting what is underneath, and installing new seamless eavestrough properly sized, pitched, and fastened for your roofline.
We remove your existing eavestrough, downspouts, and all fasteners from the full roofline perimeter. All old aluminum is fully recycled. No debris left on your property.
We inspect fascia boards and the roof edge for rot, damage, and missing drip edge before any installation begins. New gutters attached to rotted fascia fail at the same point within a few seasons. If we find damage, we tell you before starting.
Fabricated on-site, cut to the exact length of each run. No mid-run joints. We install both 5-inch and 6-inch eavestrough systems depending on roof size and water volume. Installed at correct pitch, secured with hidden hangers and gutter screws, and sealed at all corners, mitre joints, and outlets with weatherproof sealant.
Downspouts sized for your roof's water volume, positioned correctly, and directed away from your foundation. Extensions added where needed to carry water further from the house.
Family-owned, 15+ years replacing gutter systems across Toronto, Mississauga, Oakville, and the GTA. We fabricate seamless aluminum on-site using top-quality Canadian-sourced materials. Every replacement is backed by a 3-year service warranty and a lifetime limited material warranty. All old aluminum is fully recycled.
Replacing your eavestrough is a long-term investment in your home’s drainage system. We install it correctly the first time so it performs through every season without ongoing issues.
Cut to the exact length of each run on your home. No mid-run joints, fewer failure points, cleaner look along the roofline. We install both standard 5-inch eavestrough and larger 6-inch systems depending on roof size and drainage requirements.
Gutter screws and hidden hangers fastened directly into the fascia or rafter tail. Hold through ice loads and heavy snow without pulling away.
We assess your roof footprint and downspout count before specifying gutter width and downspout diameter so the system handles peak rainfall without overflowing.
Seamless aluminum in a wide range of colours to match your siding, fascia, soffit, and trim. Your new gutters coordinate with the full roofline finish.
If your gutters are rusting through, leaking at multiple points, or failing repeatedly after repairs, replacement is the more cost-effective decision.
Many Toronto homeowners install gutter protection at the same time as a full eavestrough replacement. Systems like Alu-Rex DoublePro or T-Rex can be integrated directly was continuous gutter hangers during installation, strengthening the system while helping prevent leaves and debris from clogging the trough.
As an Alu-Rex Certified Installer, Century Aluminum installs these systems according to manufacturer specifications so your new gutters stay stronger, cleaner, and lower maintenance for years.
Fix isolated leaks or damaged joints on a system that still has life in it.
Stop water from pooling where it shouldn't.
Keep leaves and debris out of your system without climbing a ladder every fall.
Repair or replace damaged downpipes as part of your replacement or as a standalone fix.
Replacement makes sense when failure is widespread, the same sections keep failing after repeated repairs, or the system is over 20 years old. If damage is isolated to one or two sections, repair is usually the right call. We inspect the full system before recommending either.
Fabricated from a continuous roll of aluminum cut to the exact length of each run. No mid-run joints eliminates the most common leaking failure points. Seamless systems look cleaner and require less maintenance than sectional systems.
Most Toronto homes are completed in one day. Timeline depends on total linear footage, number of downspouts, roofline complexity, and whether fascia repairs are needed. We give you a clear schedule before starting.
Cost depends on total perimeter, gutter profile and size, number of downspouts, and whether additional work like fascia repair or drip edge is included. We offer free on-site estimates so you know the full cost before committing.
No. Eavestrough replacement is considered routine maintenance and does not require a building permit under normal residential circumstances.
Yes. Century Aluminum serves residential and commercial properties throughout the GTA, including Mississauga, Oakville, Brampton, and surrounding communities. Contact us for a free estimate.
A new seamless aluminum system protects your home for decades with minimal maintenance. Call us today or fill out our form and we’ll get back to you within one business day.
We provide professional eavestrough replacement services across residential neighborhoods in Toronto and the Greater Toronto Area. Our team focuses on homes in suburban and residential communities, delivering reliable installation, repair, and maintenance where it matters most.
